How Much Does It Cost to Drill a Well in North Carolina?
National cost guides put a new home water well at about $3,000 to $15,000. Both guides price the drilling itself at $25 to $65 per foot. Those are market numbers for the whole country, not our price list.
The cost to drill a well in NC also carries a few items set by the state and the county. Every new private well needs a county construction permit, and the county tests the new well’s water. Four border counties post new well fees from $450 to $600, with the water test included. One guide says the final price is driven largely by depth and the distance from the house.
Core Well Drilling is based in Pacolet, SC, and is licensed to drill in North Carolina. We drill in the North Carolina border counties, about 80 to 90 miles from our shop. That covers new and replacement wells, plus farm and irrigation wells. For land in Rutherford County, see well drilling in Forest City, NC.
What do national cost guides publish for a new well?
Two national cost guides publish the figures below. They cover the whole country, so read them as a picture of the market.
| What the guides price | Published range |
|---|---|
| Drilling a home well, per foot | $25 to $65 in both guides |
| Drilling, per foot, most jobs | $25 to $35 in one guide |
| Drilling a well, typical total | $3,000 to $9,000, $5,500 average, in one guide |
| A complete well with pump and tank | $3,500 to $15,000 in the other guide |
| PVC casing, per foot | $6 to $10 |
| Steel casing, per foot | $30 to $130 in one guide, $36 to $140 in the other |
| Well pump | $900 to $2,500 in one guide |
| Pressure tank and switch | $300 to $500 in one guide |
| Pressurized storage tank | $1,400 to $2,400 in the other guide |
| Water and electric lines, per foot | $50 to $150 in both guides |
| Permits, national | $200 to $500 average in one guide |
| Water testing, national | $150 to $600 in one guide |
One guide notes that its per foot prices cover only the drilling. Casing is priced on top of that, by the foot and by material. That guide also prices wells by depth and casing type.
| Well depth | With 4 inch PVC casing | With 6 inch steel casing |
|---|---|---|
| 200 feet | $7,100 | $12,240 |
| 250 feet | $8,875 | $15,300 |
| 300 feet | $10,650 | $18,360 |
| 400 feet | $14,200 | $24,480 |
On those rows, each extra 100 feet adds $3,550 with PVC casing and $6,120 with steel.
What does a well permit cost in North Carolina?
It depends on the county. The state’s private well FAQ says each county has the authority to set its own permitting fee. Here is what four border counties post for a new private well.
| County | New well fee | What the fee covers | Schedule date |
|---|---|---|---|
| Cleveland | $500 | Construction permit, water samples included | Effective July 1, 2025 |
| Rutherford (Foothills Health District) | $450 | New well site evaluation, water samples included | Effective August 4, 2025 |
| Henderson | $480 | $350 permit plus a $130 water analysis | Effective September 1, 2023 |
| Gaston | $600 | $450 permit plus a $150 state-required water test | No date on the county pages |
These are county fees, and they are not a driller’s price. Each one includes the new well water test. One national guide lists permits and water testing as two separate lines.
Gaston County has more than 8,000 households using private wells. More than 250 private wells were built there in 2022.
For the steps from the application to the final inspection, read our North Carolina well permit guide.
Why does depth drive the price of a North Carolina well?
Most of the border counties sit on the same Piedmont rock as the Upstate. Henderson and Transylvania counties sit on the Blue Ridge edge. USGS describes a blanket of saprolite over the bedrock. Saprolite is decomposed rock, usually thick and clayey.
The bedrock below yields water mainly through fractures. The rig keeps drilling until it crosses enough of them. USGS says only about 3 percent of wells meet no fractures at all. Those wells are dry or will not hold a sustained yield.
A USGS study of more than 7,500 wells in Wake County, also in the Piedmont, shows the spread. Wells there ran from 14 to 975 feet deep. The median well was 265 feet, with 68 feet of casing and a yield of 10 gallons a minute.
These are Wake County numbers, not border county numbers. They show how far depth can swing on Piedmont rock. That 265 foot median falls between the 250 and 300 foot rows in the table above.
Nobody knows where the rock sits until the rig reaches it. So our written estimate quotes a minimum depth and explains how casing can change the total. The water you need matters too. A large family or a farm needs more gallons per minute than a couple.
What do North Carolina’s well rules add to the price?
The state construction rule, 15A NCAC 02C .0107, sets minimums that show up on every estimate:
- Casing from the surface to at least 20 feet deep, outside the state’s specially designated areas.
- In a rock well, casing seated at least five feet into the rock.
- The top of the casing at least 12 inches above the ground.
- Grout around the casing to at least 20 feet below the surface.
The deeper the rock sits, the more casing the well needs. State law, G.S. 87-97, adds the paperwork. No one may build a private drinking water well without a county construction permit. The county inspects the finished well and issues a certificate of completion before the water goes into use.
Within 30 days after that certificate, the county tests the water or has a lab do it. In all four counties above, that test is part of the fee.
What if your land is on the South Carolina side?
South Carolina has its own permit fee and its own well rules. If your land sits across the line, read what it costs to drill a well in South Carolina.
How do you get a number for your North Carolina land?
Published ranges describe a market. Your land gets a price once we have seen it. We do a site survey before we schedule, and the free estimate comes in writing with a quoted minimum depth.
The rig comes over from our shop in Pacolet, and our drillers bring more than 40 years of drilling experience. For Rutherford County land, see our Forest City, NC well drilling page. For Cleveland County, see well drilling in Shelby, NC. To start on a new or replacement well, call (864) 768-5688 and we will get back to you.